Glow Plug 16693SRV for Mitsubishi Engine L3E Generac Light Tower MLT6SMD
Get reliable cold-start performance and eliminate frustrating no-start conditions in your Generac...
View Details
<p>Stop unexpected breakdowns and costly downtime with a drop-in <strong>CASE alternator</strong> that delivers OEM-equivalent reliability — without the OEM wait or markup. Built to match the exact voltage regulation curve and pulley alignment of CASE 4391-series engines, this A187873 unit prevents undercharging in high-load excavator duty cycles where aftermarket units often fail.</p> <ul> <li>Direct replacement for CASE 170C, 220B, 480E, 580E, 590L & dozens of other models — no wiring mods or bracket adjustments needed</li> <li>Features genuine copper-wound stator windings (not aluminum) for stable 12V output even at low RPM — critical for backhoe loader idle-charging scenarios</li> <li>Backed by XUNPO’s 6-month warranty and pre-shipment load testing — because “works out of the box” shouldn’t be rare</li> <li>Ships same day from Guangzhou warehouse when ordered before 3 PM CST — no 3-week waits for urgent fleet repairs</li> </ul>
| Parameter | Details |
|---|---|
| Part Name | 12V Alternator |
| Part Number (OEM Reference) | A187873, A186125, AQ187873, Q187873, 3604448, 3604448R, 3604448RX, 3604480RX, 3604480, 3911248, 3920679, 39206791, J920679, 1103174, 1105170, 132000090065, 4029/70017, 700710688, 8003/00355, 402970017, 800300355 |
| Brand Compatibility | CASE |
| Machine Model Fitment | 170C, 220B, 480E, 480E LL, 480F, 480F LL, 580E, 580K, 580L, 580SE, 580SK, 580SL, 580M, 580SM, 590, 590L, 590SL, 590SM, 680K, 680L, 780C, 780D, 850D, 850H, 850K, 1150E, 1150H, 1155E, 1550, 1818, 1835, 1835B, 1835C, 1840, 1845C, 1896, 40XT, 450C, 455C, 570LXT, 570MXT, 621, 721, 821, 921, W11B, 584E, 585E, 585G, 586E, 586G, 588G, 686G, 686GXR, 688G, 2096, 4000, 5000, 5120, 5130, 5140, 5150, 5220, 5230, 5240, 5250, 550, 550E, 550G, 550H, 550H-IND, 6030, 8825, 8825HP, 8830, 8840, 8850, MX100, MX110, MX120, MX135, 360, 560, 660, 760, 860, 960, DH4, DH4B, TF300 |
| Engine Compatibility | 4391, 4390, 4390T, 4391T, 4391TA, 6590, 6590T, 6590TA, 6591T, 6591TA, 6830T, 6830TA, 6831T, 6831TA, PX110, PX140, PX170, PX190, PX215, PX240, PX70, PX85 |
| Condition | New Aftermarket |
| Warranty | 3–12 months against manufacturing defects |
| Packaging | Original sealed box with anti-static foam and branded carton |
| Brand | Applicable Models |
|---|---|
| CASE | 170C, 220B, 480E, 480E LL, 480F, 480F LL, 580E, 580K, 580L, 580SE, 580SK, 580SL, 580M, 580SM, 590, 590L, 590SL, 590SM, 680K, 680L, 780C, 780D, 850D, 850H, 850K, 1150E, 1150H, 1155E, 1550, 1818, 1835, 1835B, 1835C, 1840, 1845C, 1896, 40XT, 450C, 455C, 570LXT, 570MXT, 621, 721, 821, 921, W11B, 584E, 585E, 585G, 586E, 586G, 588G, 686G, 686GXR, 688G, 2096, 4000, 5000, 5120, 5130, 5140, 5150, 5220, 5230, 5240, 5250, 550, 550E, 550G, 550H, 550H-IND, 6030, 8825, 8825HP, 8830, 8840, 8850, MX100, MX110, MX120, MX135, 360, 560, 660, 760, 860, 960, DH4, DH4B, TF300 |
Every unplanned downtime hour on a CASE 170C excavator or 580E backhoe loader costs hundreds — sometimes thousands — in lost productivity, labor, and contract penalties. Counterfeit alternators fail within weeks, causing voltage spikes that damage ECUs and sensors. OEM replacements take 2–4 weeks to arrive, halting your entire fleet maintenance schedule. And sourcing reliable parts for multiple CASE models — from 4391 engines to 590L loaders — across different suppliers wastes time and increases error risk.
This 12V alternator A187873 is manufactured exclusively in ISO 9001-certified factories and undergoes full-load performance testing at 12V/100A output before dispatch — matching original CASE specifications for regulated voltage (13.8–14.4V), ripple voltage (<200mV), and thermal stability up to 105°C. With 10 years of global export experience and 10,000+ CASE-compatible SKUs in stock, XUNPO delivers precision-engineered electrical components trusted by repair centers maintaining high-utilization CASE fleets across North America, Africa, and Southeast Asia.
The A187873 alternator powers critical systems on CASE machines operating in demanding environments: earthmoving on mining sites, continuous loading at ports, trenching in wet soil, and demolition work under dust and vibration. In these conditions, consistent charging ensures stable hydraulic control, accurate sensor feedback, and uninterrupted operation of cab monitors and joystick electronics. It directly supports CASE 4391 and 4390-series engine reliability — where voltage instability can trigger false fault codes or premature starter motor wear. CASE alternator replacement is not optional maintenance; it’s foundational system integrity.
The rotor uses high-purity copper windings with Class H insulation (180°C rating) to sustain peak output during extended high-RPM operation on CASE 580E loaders. The stator core is laminated silicon steel with tight tolerances (±0.05mm) to prevent magnetic flux leakage and ensure consistent voltage regulation. Internal rectifier diodes are rated for 200V reverse blocking and 150°C junction temperature — exceeding OEM spec to handle voltage transients from hydraulic pump load cycling. The front bearing is double-sealed NSK 6002ZZ with lithium-complex grease, designed for 10,000+ hours under radial loads up to 120N. Surface finish on the pulley hub meets ISO 2768-mK standards for precise belt alignment and minimal slippage on CASE 170C and 220B excavators.
A $75 counterfeit alternator may save short-term cost — but causes cascading failures: ECU resets, battery sulfation, and intermittent instrument cluster blackouts that require diagnostic labor averaging $120/hour. Field data from 37 CASE fleet operators shows average secondary repair cost per failed aftermarket alternator exceeds $420 — including tow fees, labor, and delayed job completion. By contrast, this A187873 alternator meets ISO 8528-3 generator standards and carries full traceability to production batch and test logs. Total cost of ownership drops when you factor in 3–12 month warranty coverage, zero unplanned downtime, and compatibility verified against CASE 4391 engine service manuals. CASE 170C alternator replacement isn’t about volts — it’s about predictable uptime.
Only ISO 9001-certified factories supply our alternators — every coil, diode, and bearing batch is inspected upon receipt. Each unit undergoes 100% functional testing: no-load voltage, full-load regulation, ripple measurement, and thermal soak at 85°C ambient. We provide 3–12 month warranty covering all manufacturing defects — no questions asked. With 10 years exporting to 120+ countries, we’ve shipped over 27,000 CASE electrical components since 2021. Our 20+ technical team includes 7 certified CASE service engineers who verify part fitment within 2 hours using official CASE parts catalogs and engine serial decoding. Guangzhou warehouse holds 1,200+ units of A187873 in ready-to-ship inventory — no waiting for production runs.
Your CASE 580E or 170C won’t wait — and neither should your parts order. Send us your machine model, quantity, and destination port — we’ll reply within 24 hours with a firm quote and availability confirmation. First-time buyers can request a sample for bench testing before bulk purchase. Every day your excavator sits idle costs revenue; let’s get it running again with a genuine-performance alternator.
Q: Is this an original CASE part or an aftermarket replacement?
A: This is an OEM-equivalent aftermarket alternator, manufactured in ISO 9001-certified facilities to match CASE A187873 specifications — not a recycled or counterfeit unit.
Q: How do I confirm if this fits my specific CASE machine?
A: Provide your exact model (e.g., CASE 580E), engine serial number (if available), and year — our technical team confirms compatibility within 2 hours using official CASE documentation.
Q: What is the warranty period?
A: 3–12 months from shipment date, covering defects in materials or workmanship. Defective units are replaced free of charge with proof of purchase.
Q: What is the minimum order quantity?
A: 1 piece — no minimum. Ideal for emergency repairs, single-machine operators, or verification before larger orders.
Q: How long does shipping take?
A: In-stock items ship within 2–5 working days. Express courier delivery takes 3–7 days globally; air and sea options available upon request.
Q: Can I receive a sample before placing a bulk order?
A: Yes — first-time customers may request one sample unit for functional testing. Sample fee is fully credited toward your first bulk order.
Ready to order or need a quote?
Send your part number, machine model, and quantity — we'll respond within 24 hours.
WhatsApp: +86 13316055942 | Email: talos@xunpojx.com
Parts available for all major excavator and heavy equipment brands
Guangzhou's trusted excavator parts supplier since 2015
8 core categories for all major brands
Fast dispatch from Guangzhou warehouse
Professional team for part verification
Global shipping with real-time tracking
Get reliable cold-start performance and eliminate frustrating no-start conditions in your Generac...
View Details
Stop unexpected shutdowns and get your CASE or Cummins machine back online...
View Details
Stop unexpected shutdowns and get your John Deere loader or tractor back...
View Details
Stop downtime from failing alternators—get reliable 12V power back fast with the...
View DetailsOur experts are available 24/7 -- get a response within 2 hours.