Cross-Reference Wheel Tensioner 7167165 for Bobcat S510-S850 T550-T870

Cross-Reference Verified — Each 7167165 tensioner matched against Bobcat serial ranges before dispatch.

Technical Specifications

Application Suitability

Why the Same Part Number Ships in Several Variants

A single base identifier often covers multiple tensioner builds across Bobcat S-series and T-series machines.

In the Pearl River Delta parts trade, I have watched a correct-looking 7167165 wheel tensioner sit on a workshop bench because the spline count or shaft diameter was one step off from what the loader actually needed. Superseded numbers get copied from one catalog to another, and small dimensional changes between model years never make it into the spreadsheet [NEED_CITE: aftermarket cross-reference accuracy in skid steer belt drive systems]. That is why serial-range confirmation matters just as much as the number itself.

Matching Tensioner Variants to Your Bobcat Serial Range

The Bobcat S510 through S850 and T550 through T870 families share a common belt drive architecture, yet the wheel tensioner 7167165 appears in at least two mechanical configurations. Early S-series loaders often use a shorter pivot arm and a different spring anchor point compared to later production runs. Providing the machine serial number lets the technical team narrow down which variant belongs on your accessory drive.

Dimensional Checks That Prevent a Mismatched Shipment

Before a tensioner leaves the Guangzhou warehouse, mounting bolt pattern, pulley diameter, and spring travel range are compared against the known build for that serial range. Port position on adjacent brackets and the clearance to the fan shroud also come into play. When a worn nameplate leaves only the model as a starting point, a photograph of the existing tensioner arm and pulley can close the identification gap [NEED_CITE: belt drive alignment and tension specification for compact loaders].

Reading the Specs That Matter in the Field

High-strength steel alloys in the tensioner body resist the cyclic loading imposed by the accessory belt every time the engine starts and the hydraulic system spikes. The corrosion-resistant coating protects pivot surfaces from the fine abrasive dust that accumulates around the belt drive on construction and quarry sites. Together, these material choices maintain consistent belt tension across the temperature swings seen in both cold-start conditions and continuous heavy lifting cycles.

What a Wrong Tensioner Costs Beyond the Return Freight

An incorrect variant that bolts on but sits a few millimetres off-centre will wear the belt edge within days. The operator notices a squeal during cold starts, dismisses it, and the belt eventually jumps a rib — taking down the alternator and hydraulic pump drive together. The machine sits while a second part is sourced, and the labour spent on the first installation is written off [NEED_CITE: premature belt failure caused by misaligned tensioner in mobile equipment]. Fitment certainty is the real savings.

Why Buyers Source This Tensioner Through Our Guangzhou Facility

Selected part lines are produced in-house, while the remainder comes from ISO 9001 manufacturing partners — both routes carry identical quality control and warranty terms. Eight product categories sit under one account, so a full belt-drive job list ships as one consignment. Orders start at a single piece, which is essential when an emergency repair cannot wait for a batch. Cross-reference verification covers superseded and alternate numbers, and a sample unit can be dispatched for physical fitment confirmation before any bulk commitment is made.

Documentation & Verification

• Commercial invoice referencing 7167165 and applicable Bobcat serial ranges.
• Compatibility and cross-reference sheet marked reference only for OEM numbers.
• Dimensional inspection record covering bolt pattern, pulley diameter, and spring travel.
• Warranty terms sheet outlining coverage period and claim procedure.
• Packing photographs taken before crate closure for visual dispatch proof.
• HS code and customs documentation support for belt drive components.

Fitment Check Before Installation

• Compare the received wheel tensioner 7167165 mounting face against the removed unit before unboxing seals.
• Measure pulley outer diameter and confirm it matches the belt width specification for your Bobcat model.
• Rotate the tensioner arm through its full travel to verify spring pressure feels consistent with the old assembly.
• Check bolt thread condition on the mounting bracket; chase threads if corrosion is present.
• If any dimension deviates, halt installation and request a cross-reference re-verification.

Confirm Your Machine Fitment

Share the Bobcat model, serial number, or a photograph of the existing tensioner and nameplate. The technical team will return a verified fitment match and cross-reference sheet for your specific machine build.

Frequently Asked Questions

Q: How do I confirm this tensioner fits my specific Bobcat model and serial number? A: Provide the machine model and serial number from the data plate. The technical team cross-checks the tensioner variant — including arm length, pivot bore, and spring anchor — against the production records for that serial range before confirming fitment.

Q: The part number on my old tensioner differs from 7167165 — is it still the right replacement? A: Part numbers get superseded across production years. Send a photo of the original label or stamped number along with the machine model. A cross-reference lookup will confirm whether 7167165 replaces your existing identifier.

Q: Why are there multiple tensioner variants under the same base number? A: Bobcat updated mounting patterns, spring rates, and pulley sizes across model generations while retaining a common base reference. Serial-range verification isolates the exact variant that matches your loader's accessory drive layout.

Q: I only have the machine model — no readable part number. Can you still identify the correct part? A: Yes. Share a photograph of the machine nameplate and, if possible, the existing tensioner assembly. The combination of model, approximate year, and visual reference is usually enough to pinpoint the correct variant.

Q: Can I order one sample before committing to a larger quantity? A: A single sample unit is available for dispatch. Fit it on the machine to confirm bolt pattern, pulley alignment, and belt routing before placing a fleet-level order.