Verified Fitment Stop Solenoid AM882277 Compatible with John Deere

Cross-Reference Verified — Dimensional and connector checks confirm AM882277 maps correctly across superseded John Deere compact tractor solenoid numbers before dispatch.

Technical Specifications

Application Suitability

Why the Same Stop Solenoid Ships Under Multiple Part Numbers

Superseded references and variant builds mean one physical solenoid can appear under several identifiers across model years.

Cross-reference tables copied between sellers often carry forward errors from outdated catalogues, and a Fuel ShutOff Solenoid for John Deere 670 770 870 970 1070 cross reference fitment search may surface numbers that applied only to early production runs. I have seen situations where the part number matched perfectly on paper, yet the port orientation was rotated ninety degrees on the actual machine because the serial range fell into a different build variant [NEED_CITE: agricultural equipment serial number break points for component revisions]. The only reliable path is physical comparison of the removed unit against the replacement before installation.

Model Range and Serial Range Coverage

This Fuel ShutOff Solenoid for John Deere 670 770 870 970 1070 cross reference fitment spans the full compact utility tractor series, but applicability narrows once serial number breaks are considered. Production changes across these models introduced variations in connector type, mounting hole spacing, and plunger stroke length. Confirming your machine serial number allows us to isolate the exact variant that fits your build rather than shipping a visually similar unit that will not seat or connect properly.

Connector, Flange, and Plunger Verification Points

The electrical connector on these solenoids has appeared in at least two configurations across the model range, and swapping between them without an adapter is not possible on site. Mounting flange bolt patterns also shifted on later serial ranges, meaning an AM882277 pulled from a 770 may not bolt directly onto a 970 produced in a different year without verifying hole centres [NEED_CITE: compact tractor fuel system fastener pattern variations across production years]. We compare flange dimensions, connector pin layout, and plunger extension length against photographs of your removed unit before confirming shipment.

Reading the Specifications That Matter on Site

The 12V coil rating must match the machine electrical system exactly — a 24V system feeding a 12V coil will burn out the winding within minutes of key-on, while a 12V coil on a 24V circuit will not generate sufficient magnetic force to pull the plunger. The new aftermarket condition means the internal spring return and plunger seal are unworn, which matters because a fatigued spring can cause the solenoid to fail to retract, leaving the fuel rack in an ambiguous position between run and stop. ISO-certified manufacturing ensures coil winding consistency and dielectric strength meet recognised production standards rather than varying between batches.

What Happens When Fitment Verification Is Skipped

Ordering a Fuel ShutOff Solenoid for John Deere 670 770 870 970 1070 cross reference fitment purely on part number without checking the physical interface leads to one of two costly outcomes. The solenoid arrives and simply does not bolt on, requiring return freight and a second wait while the machine sits idle. Or worse, it bolts on but the plunger travel or connector pin-out is wrong, causing intermittent shutdowns or a failure to restart — a fault that is time-consuming to diagnose because it mimics fuel system or electrical gremlins elsewhere in the circuit [NEED_CITE: intermittent engine shutdown diagnosis in compact utility tractors]. Either scenario extends downtime well beyond what a five-minute comparison would have prevented.

Why Buyers Source This Solenoid Through Our Desk

Our Guangzhou warehouse stocks common fast-failure electrical components including stop solenoids, so typical items can ship without multi-week waits. We produce selected part lines in our own facility and source the remainder from qualified ISO-certified manufacturing partners, both carrying the same warranty terms — so you get consistent coverage regardless of production origin. Part identification works from a part number, machine model, photograph, or nameplate image, which matters when the original label on the solenoid is faded or painted over. Cross-reference verification covers superseded and alternate numbers including AM876416 and P610-C5V12, confirmed against your specific serial range. Sample supply is available for fitment confirmation before you commit to a bulk order across a mixed-model fleet.

Documentation & Verification

• Commercial invoice listing AM882277 with all applicable cross-reference numbers noted as reference only
• Fitment verification sheet mapping your machine serial number to the confirmed solenoid variant
• Dimensional check record covering flange bolt centres, connector pin count, and plunger stroke
• Quality inspection report confirming 12V coil resistance and dielectric strength within tolerance
• Packing photographs showing the solenoid and connector protected before crate closure
• HS code and export documentation prepared for agricultural parts customs classification

Fitment Check Before Installation

• Compare mounting flange bolt hole spacing on the new AM882277 against the removed solenoid before unboxing fully
• Verify the electrical connector pin layout and locking tab orientation match the machine wiring harness plug
• Check plunger extension length and tip shape against the old unit to confirm fuel rack engagement
• Hand-cycle the plunger to feel for smooth return spring action and absence of binding
• If any dimension or connector differs, halt installation and contact us with photographs before proceeding

Before You Request a Quote

Send us the exact machine model and serial number from the identification plate, along with a clear photograph of the removed solenoid showing the connector face and mounting flange. If the original part number label is still legible, include that as well. We will return a confirmed fitment assessment and cross-reference match so you can order with confidence that the unit will bolt on and connect correctly the first time.

Frequently Asked Questions

Q: How do I confirm this solenoid fits my specific John Deere compact tractor model and serial range? A: Provide your machine model, serial number, and a photograph of the removed solenoid. We cross-check the flange pattern, connector type, and plunger stroke against our fitment database for the 670 through 1070 range and confirm which variant applies to your exact build before you commit to an order.

Q: My old solenoid has a different part number — is AM882277 still the correct replacement? A: It may be. Numbers like AM876416 (reference only) were used on earlier production runs and later superseded. Send us the number from your old unit and your machine serial, and we will trace whether it maps to the current AM882277 variant or whether a different configuration is needed.

Q: Why are there multiple part numbers listed for what looks like the same solenoid? A: John Deere revised this solenoid across model years, changing connector types and flange patterns while keeping the basic function identical. AM882277, AM876416, P610-C5V12, and P610C5V12 (all reference only) each correspond to specific build periods. Serial number verification determines which one fits your machine.

Q: I only have the machine model with no readable part number — can you identify the right solenoid? A: Yes. Send a photograph of the machine nameplate and, if possible, the removed solenoid from multiple angles. We use the model and visual details — bolt spacing, connector shape, plunger length — to narrow the correct variant even without a legible original number.

Q: Can I order a single sample to verify fitment before placing a larger order? A: Yes, our minimum order is one piece. Buyers maintaining mixed fleets of 670, 770, 870, 970, and 1070 tractors commonly order one Fuel ShutOff Solenoid for John Deere 670 770 870 970 1070 cross reference fitment as a trial fit before committing to bulk quantities.